Skip to content
Commercial mechanical, gas, heating & electrical specialists
01252 214120 Request a quote
ComGas Services UK Ltd

Commercial Oil Heating & Boiler Services

ComGas installs, services and maintains oil-fired heating for commercial premises and off-mains sites across Surrey, Hampshire, Berkshire and West Sussex.

Where a building has no mains gas connection, oil-fired plant usually carries the whole heating and hot-water load, so its condition decides whether the building stays warm. Our OFTEC-registered engineers work on commercial oil boilers, pressure jet burners and the systems around them, from planned replacement through to annual servicing and reactive repair.

Oil storage is scoped separately, under its own standards — see Oil Tank Installation & Replacement. For oil heating in a private home, see Residential Oil Heating.

Commercial Oil Boiler Installation & Replacement

Oil-fired plant is normally replaced because it has reached the end of its working life or because the building’s heat load has changed. Either way the specification starts with the existing installation, not the appliance catalogue.

Our engineers install:

  • Commercial and light commercial oil boilers
  • Pressure jet burners
  • Oil-fired hot water systems
  • Associated components and system pipework

All installations are completed in line with OFTEC standards, Building Regulations and BS 5410 Part 1.

Where the oil storage installation is being replaced at the same time, that scope is covered on Oil Tank Installation & Replacement.

Discuss commercial oil heating
Commercial Oil Boiler Servicing & Maintenance

Commercial Oil Boiler Servicing & Maintenance

Annual servicing keeps an oil-fired appliance burning cleanly and gives early warning of the faults that otherwise become winter breakdowns.

Servicing includes:

  • Full inspection and servicing of the appliance
  • Combustion checks to ensure safe operation
  • Cleaning to reduce soot and residue build-up
  • Performance optimisation for improved efficiency
  • Identification of potential faults before they escalate

Servicing can be arranged as a standalone visit or included in a wider ComGas maintenance programme alongside gas, heating and mechanical assets, subject to the agreed asset and service scope — see Service & Maintenance.

Discuss commercial oil heating

Oil Heating Repairs & System Support

Oil-fired systems need attention through the year, not only at service time.

Where a system is losing performance, locking out or no longer matching how the building is used, our engineers diagnose the cause and set out the practical options — repair, component replacement, or planned replacement of the appliance.

Work covers pressure jet appliances, oil-fired heating systems and their associated components in commercial and off-mains premises.

Discuss commercial oil heating
How ComGas works on commercial oil plant

How ComGas works on commercial oil plant

Oil-fired heating is a separate discipline from mains gas, with its own standards and its own failure modes.

  • OFTEC-registered engineers with specialist oil heating experience
  • Commercial and light commercial oil-fired plant
  • Work carried out in line with BS 5410, OFTEC standards and Building Regulations
  • Servicing recorded, with findings and any remedial recommendations set out clearly
  • Scope confirmed and agreed before work begins
  • Support from installation through to ongoing maintenance
Discuss commercial oil heating

Oil Heating Safety and Compliance

An oil-fired installation has to be commissioned and maintained correctly to burn safely and efficiently, and in an occupied commercial building the consequences of getting it wrong are not confined to one household.

Our engineers work in accordance with BS 5410 Part 1, OFTEC installation standards and Building Regulations.

Detailed checks are carried out during installation and servicing to confirm safe fuel combustion, limit emissions and maintain the integrity of the system.

Discuss commercial oil heating
Commercial Oil Heating FAQs

Commercial Oil Heating FAQs

Do I need an OFTEC-registered engineer for a commercial oil boiler?
Oil-fired appliances should be installed and serviced by an OFTEC-registered engineer, so the work is carried out to the relevant standards and correctly documented.

How often should a commercial oil boiler be serviced?
Annually. Regular servicing maintains efficiency, limits soot build-up and confirms safe combustion.

Do you work on oil-fired plant as well as individual boilers?
Yes. Work covers commercial and light commercial oil boilers, pressure jet burners, oil-fired hot water systems and their associated components.

Who looks after the oil tank?
Oil storage is a separate scope under its own standards. See Oil Tank Installation & Replacement.

I need oil heating work at home — is this the right page?
For oil heating in a private home, see Residential Oil Heating.

Discuss commercial oil heating

Let's talk

01252 214120

Whether it’s a general enquiry or to discuss a new project, give us a call or fill out the form and we’ll get straight back to you.

  • info@comgas.uk
  • Unit 1, Riverside Park Estate, Dogflud Way, Farnham, Surrey, GU9 7UG
Talk to ComGas

Looking for a reliable commercial engineering partner?

Current accreditations and registrations.

Gas Safe Registered OFTEC Registered REFCOM F-Gas Certified CHAS Accredited Constructionline Approved
Quick office contact

Prefer WhatsApp?

Message the ComGas office on 01252 214120.

WhatsApp our office